Arag DIGIWOLF - Battery powered version User Manual

462840546285064628707CELL POWERED VERSIONSoftware rel. 1.0XINSTALLATION, USE AND MAINTENANCEdigi

104 PRELIMINARY SETUP FOR USEFor a correct display of data regarding treatment, some preliminary set ups are necessary when installing DigiWolf on fa

114.1.2 Manual calibrationTo set the owrate constant manually, calculate and set the correct constant using the following formula: [amount measu

124.2 Flowrate alarmsSet the minimum and maximum values beyond which the display must show an alarm message.Flowrate alarmsMin flow alarmMax flow ala

134.4 Energy savingDigiWolf allows the setting of some parameters in order to prolong battery life:- Backlight shut-off: it is possible

144.5.2 Units of measurementSet units of measurement for owrate values and volume read by the device.4.5.2.1 Rate units of measurementUnits of meas

154.6 TestIn this menu is it possible to see some information and run a device operation test:- Firmware version: the display shows the

165 USEOnce the setup is nished, Digiwolf is ready for use. The main screen shows the display divided into three horizontal sectors. The sectors show

176 CLEANING AND REPAIR- At the end of each treatment, run clean water through the tubes.- If necessary, periodically clean or replace the owmeter p

186.2 Paddle cleaning and replacementlockunlock1) Remove the fork from the monitor using a screwdriver.2) Remove the monitor from the owmeter body.3

196.3 OR replacementWith the removed sensor housing block (see Par. 6.2) proceed as follows:1) Remove the fork from the ring nut using a screwdriver.

= Generic danger= WarningThis manual is an integral part of the equipment to which it refers and must accompany the equipment in case of sale or chang

20Data Min. Max. Default UoM NotesCalibration Manual calibration 1 50,000 600 -- --Flowrate alarmsMin. owrate alarm 0.1 99999.9 OFF l/min.The alarm c

Notes21

9 GUARANTEE TERMS 1. ARAG s.r.l. guarantees this apparatus for a period of 360 day (1 year) from the date of sale to the client user (date of the go

Conformity Declaration ARAG s.r.l.Via Palladio, 5/A42048 Rubiera (RE) - ItalyP.IVA 01801480359Dichiarache il prodottodescrizione: Flussometro a pa

D20246_GB-m01 06/201142048 RUBIERA (Reggio Emilia) - ITALYVia Palladio, 5/ATel. +39 0522 622011Fax +39 0522 628944http://www.aragnet.cominfo@aragnet

3CONTENTS1 Product description ...

41 PRODUCT DESCRIPTIONDigiWolf is a battery powered paddle owmeter capable of measuring the rate of a uid in a hydraulic circuit, and it can displa

52.1 Monitor rotationIn case of vertical assembly, to simplify the use of the DigiWolf it is possible to rotate the monitor by 90° with respect to th

62.2 Dimensions (mm)EBD120C95143TA2.3 Hydraulic connections2.3.1 Hydraulic connection for brass/fork connectionsAvoid bends and constrictions befor

72.4 Power supplyDigiWolf is powered by 2 AA batteries type LR6 (alkaline) or FR6 (Li-Fe S2).2.4.1 Battery replacement0.0 l/min120.0 lTo insert or r

83 CONTROLS IN THE MENU0.0 l210.0 l/minSWITCH ONThe display turns on automatically at liquid passage. If you need to switch on the device to check or

9 MENU STRUCTUREPar. 4.5.2.1Par. 4.5.2.2Par. 4.5.2.1Par. 4.5.1Par. 4.1.2CalibrationMan. calibration600Auto calibrationPar. 4.1.1Flowrate alarmsMin fl